Leave a Request

The moisture sensor of concrete batching plant

The moisture sensor of concrete batching plant Now in the concrete batching plant equipment, moisture sensors have become more and more important. They can be very helpful in the production process of the concrete batching plant to hold a measure of raw water, which not only ensures production quality,but also brings more benefits for a concrete batching plant.In the process of production, if moisture sensor is working properly, its thick front panel of the bed material must have at least 4 inches (10 centimeters), in addition, the material must be known or have constant density. Materials must be held or be restricted, which is difficult to do with a stagnant bed material does not move.During the installation of the moisture sensor. Firstly, the channels should be through into the center of the chute and the funnel-shaped channel.The second is to establish a flapper valve, it alternately holds and releases substances, and let the fresh samples to be measured. Flapper valve is hinged counterweight arrangements to keep it closed until the slide is completely filled with material, it will be opened to let the material out. This also prevents clogging and accumulation, which may be caused by the bulk material.In the process of concrete, make sure that the moisture sensor can be used well, and the manufacturer will provide detailed installation, the user can read for using.

0

0 Comment

avatar
Submit
Cancel
    © 2023 Camelway Machinery